| Category | Specifications |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all four radios Supported frequency bands (country-specific restrictions apply): 2.401 - 2.484 GHz 5.150 - 5.250 GHz (UNII-1) 5.250-5.350 GHZ (UNII-2A) 5.490 - 5.730 GHz (UNII-2C) 5.735 - 5.825 GHz (UNII-3) |
| Antenna | List of compatible antennas: MA-ANT-20/25/27 and AIR-ANT2513P4M-N= Antenna are not included, please see "Ordering Information" |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** 4 x 4 multiple input, multiple output (MIMO) with four spatial streams SU-MIMO, UL MU-MIMO** and DL MU-MIMO support Maximal ratio combining (MRC) & beamforming 20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax) Note: *40MHz channels are supported only in the 5GHz band. Up to 1024-QAM on both 2.4 GHz & 5 GHz bands Packet aggregation |
| Power | Power over Ethernet: 42.5 - 57 V (802.3at compatible) Power consumption: 30W max (802.3at required) Power over Ethernet injector sold separately Note: Actual power consumption may vary depending on the AP usage. |
| Interfaces | 1x 100/1000/2.5G BASE-T Ethernet (RJ45) |
| Mounting | All standard mounting hardware included Mounts to walls and vertical poles. |
| Physical Security | Two security screws Concealed mount plate with anti-tamper cable bay |
| Environment | Operating and storage temperature: -40 °F to 131 °F (-40 °C to 55 °C) Operating and storage humidity: 5 to 95% non-condensing Operating and storage altitude: Up to 40,000 feet (12,192 meters) IP67 Environmental rating |
| Reliability | Mean Time Between Failure (MTBF): 1,566,656hrs at 25°C operating temperature |
| Physical Dimensions | 11.81” x 6.02” x 2.16” (30.0 cm X 15.3 cm X 5.5 cm), not including cable gland, mounts or antennas Weight: 1.5 kg |
| Security | Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)** EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM TKIP and AES encryption Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing |
| Quality of Service | Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping |
| Mobility | PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming |
| Analytics | Embedded location analytics reporting and device tracking Global L7 traffic analytics reporting per network, per device, & per application |
| LED Indicators | 1 power/booting/firmware upgrade status |
| Regulatory | RoHS For additional country-specific regulatory information, please contact Meraki sales |
| Warranty | Outdoor access point 1 year hardware warranty with advanced replacement included |
| Ordering Information | MR86-HW: Meraki MR86 Cloud Managed 802.11ax AP MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included) MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included) MA-ANT-20 Meraki Dual-Band Omni Antennas MA-ANT-25 Meraki Dual-Band Patch Antenna MA-ANT-27 Meraki Dual-Band Sector Antenna AIR-ANT2513P4M-N= Dual-band, 4-port, 30° beam For AIR-ANT2513P4M-N= antenna, contact Cisco directly Note: Meraki access point license required. |
