| Category | Specifications |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio 5 GHz 802.11a/n/ac/ax client access radio 6 GHz 802.11ax client access radio 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios |
| Antennas | CW-ANT-O1-NS-00 Omnidirectional Dipole Self-Identifying Antenna with N-Type Connectors 2.4GHz: Peak gain 4 dBi, omnidirectional in azimuth 5GHz: Peak gain 8 dBi, omnidirectional in azimuth 6GHz: Peak gain 8 dBi, omnidirectional in azimuth One antenna per pack. Four antennas are required to fully populate all ports. CW-ANT-D1-NS-00 4-Port Directional Patch Self-Identifying Antenna with N-Type Connectors 2.4 GHz: Peak gain 8 dBi, directional antenna, (75x30) 5 GHz: Peak gain 9 dBi, directional antenna, (60x30) 6 GHz: Peak gain 9 dBi, directional antenna, (72x27) CW-ANT-GPS2-S-00 Active GNSS/GPS Antenna with RP-SMA Connector Optional GNSS/GPS external antenna L1/L5 frequency bands Integrated mounting bracket for wall or pole mounting 10ft cable with RP-SMA connector |
| 802.11 ax compatible, 802.11ac Wave 2 and 802.11n Capabilities | UL/DL-OFDMA Target Wait Time (TWT) BSS coloring* 2x2 MIMO with two spatial streams Maximal ratio combining (MRC) 802.11ax beamforming 20 and 40 MHz* channels (802.11n) 20, 40*, 80 MHz channels (802.11ac Wave 2) 20, 40*, 80 and 160MHz channels (802.11ax) Note: *40MHz channels are supported only in 5 & 6 GHz bands Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands Packet aggregation - A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| Power | Power over Ethernet: 42.5 - 57 V (PoE and UPoE compliant) Power requirement: Up to 25W (PoE ) Power over Ethernet injector sold separately Actual power consumption may vary depending on the AP usage |
| Interfaces | 1x 100M/1000M/2.5G Multigigabit Ethernet (RJ-45) Management console port (RJ-45) 4x N-Type Wi-Fi Antenna Connectors RP-SMA Active GPS/GNSS Antenna Connector |
| Mounting | Wall and pole (2.5” to 3.9” diameter) mount capable Compatible with MA-MNT-MR-16 (included) and AIR-MNT-VERT1 |
| Security | Integrated Layer 7 firewall with mobile device policy management Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal Flexible guest access with device isolation VLAN tagging (802.1q) and tunneling with IPsec VPN PCI compliance reporting WPA2-PSK, WPA2-Enterprise, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE) EAP Local authentication - EAP-TTLS/PAP, PEAP-GTC, EAP-TLS Advanced Encryption Standard (AES) Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration Cisco ISE integration for Guest access and BYOD Posturing |
| Quality of Service | Advanced Power Save (U-APSD) WMM Access Categories with DSCP and 802.1p support Layer 7 application traffic identification and shaping |
| Mobility | PMK, OKC, & 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming |
| Analytics | Embedded location analytics reporting and device tracking Global L7 traffic analytics reporting per network, per device, & per application |
| LED Indicators | One power/booting/firmware upgrade status |
| Reliability | Mean Time Between Failure (MTBF): 468,413 hrs at 77°F (25°C) operating temperature 128,631 hrs at 149°F (65°C) operating temperature |
| Dimensions (W x L x H) | Access point (without mounting brackets): CW9163E: 9.64 x 9.64 x 2.5 in. (245 x 245 x 63.5 mm) |
| Weight | 3.3 lb (1.50 kg) |
| Input power requirements | 802.3at Power over Ethernet Plus (PoE ), 802.3af Power over Ethernet (PoE) |
| Power Source | 2.4GHz radio | 5GHz radio | 6GHz radio | Link speed | Max PoE Power Consumption |
| 802.3at (PoE ) | 2x2 | 2x2 | 2x2 | 2.5 Gbps | 25.5 W |
| | 802.3af (PoE) | 1x1 | 1x1 | off | 1Gbps | 14.0 W |
| | Note:Actual power consumption may vary depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation. |
| Environmental | Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m) Operating temperature: -40° to 149°F (-40° to 65°C) without solar derating Operating temperature: -40° to 131°F (-40° to 55°C) with solar derating Operating humidity: 5% to 95% (noncondensing) Operating altitude test: 40°C (104°F) at 9843 ft (3000 m) Ingress Protection: IP67 Wind resistance up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts Icing protection: MIL-STD-810F,13mm 13mm (0.5 in.) Corrosion: NEMA 250-2008 (600 hrs. salt, 1200 hrs. mixed gas) Solar radiation: EN 60068-2-5 (753 W/m2) Vibration: MIL-STD-810E, Method 514.4 (0.41 Grms from 5Hz to 500Hz, 2 hours per each axis X,Y,Z) |
| System memory | 2048 MB DRAM 1024 MB flash |
| Warranty | Outdoor access point 1 year hardware warranty with advanced replacement included |
| Available transmit power settings | 2.4GHz 23 dBm (200 mW) -4 dBm (0.39 mW) | 5GHz 23 dBm (200 mW) -4 dBm (0.39 mW) | 6GHz 23 dBm (200 mW) -4 dBm (0.39 mW) Note: In countries where use of the 6 GHz band is not allowed or authorized or if there is no current software support, the 6 GHz radio will be disabled. The 6 GHz radio may be enabled with future software, once the product is certified to operate at 6 GHz for that country. |
