The 16-port 10 Gigabit Ethernet module provides up to 130 10 Gigabit Ethernet ports in a single Cisco Catalyst 6500 chassis and 260 10 Gigabit Ethernet ports in a virtual switching system (VSS) and is targeted for LAN campus aggregation and data center access, where fan-out and port density are very important. It consists of 4 port groups of 4 ports each. Users can operate each port group in either oversubscription mode (2 to 4 ports used per port group) or performance mode (1 port used per port group), allowing maximum flexibility for using some ports for connection to servers in performance mode and some other uplinks to wiring closets in oversubscription mode.
CISCO WS-X6716-10G-3C CATALYST 6500 16 PORT 10GB ETHRNET MODULE DFC3C – New
$ 6,700.00 $ 1,295.00
NEW CISCO WS-X6716-10G-3C CATALYST 6500 16 PORT 10GB ETHRNET MODULE DFC3C
Product Code |
WS-X6716-10G-3C |
Feature |
16-Port 10GbE Fiber Module |
Ports |
16 |
Optics |
X2 |
Switch fabric connection |
40 Gbps (80 Gbps full duplex) |
Oversubscription |
4:1 |
Forwarding engine |
● WS-X6716-10G-3C: equipped with DFC3C for distributed forwarding, supporting 256,000 routes |
Queues |
Oversubscription mode: ● Receive: 1p7q2t per port ● Transmit: 1p7q4t per port group Performance mode: ● Receive: 8q4t per port ● Transmit: 1p7q4t per port |
Queuing mechanisms |
● CoS-based queue mapping ● DSCP-based queue mapping |
Scheduler |
Oversubscription mode: ● DWRR ● WRED Performance mode: ● DWRR ● WRED ● SRR at egress |
Port buffers |
Oversubscription mode: ● 90 MB per port group Performance mode: ● 200 MB per port |
Hardware-based multicast replication (Layer 2) |
● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module |
Hardware-based multicast replication (Layer 3) |
● Ingress and egress ● Approximately 20 GB per replication engine ● 2 replication engines per module |
Jumbo frame support for bridged and routed packets |
Up to 9216 bytes |
Maximum port density per chassis |
130 ports (9-slot chassis) |
Maximum port density per VSS |
260 ports |
Can be used to form virtual switch link |
● Performance mode: Yes (supported in a subsequent software release) ● Oversubscription mode: No |
Supervisor engines supported |
Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode) |
Chassis supported |
● Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, and C6509-NEB-A chassis with dual fan tray (NEBS compliant: operating temperature up to 55°C), or; ● Non-E-Series chassis with fan tray 2, including Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray (non-NEBS compliant: operating temperature up to 40°C) ● Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis |
Slot requirements |
● Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis ● Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis |
Onboard memory |
1 GB default |