| Software compatibility |
● Cisco Collaboration Endpoint Software Version 9.14.5 or later, or Webex RoomOS
|
| Default components in Webex Room Kit Plus |
● Webex Codec Plus
● Webex Quad Camera
● Webex Room Navigator control unit
● Wall mount for Quad Camera
|
| Available integrator bundles |
● Webex Room Kit Plus PTZ 4K (featuring the Webex PTZ 4K Camera)
|
| Optional hardware components |
● Cisco Table Microphone, Cisco Ceiling Microphone, Wall mount for Codec Plus, cables, spare Webex PTZ 4K Camera, spare Webex Precision 60 Camera, spare Cisco TelePresence SpeakerTrack 60 Camera
|
| Bandwidth |
● Up to 6 Mbps point-to-point
|
| Minimum bandwidth for resolution/frame rate |
H.264
● 720p30 from 768 kbps
● 720p60 from 1152 kbps
● 1080p30 from 1472 kbps
● 1080p60 from 2560 kbps
|
| Firewall traversal |
● Cisco Expressway
™ technology
● H.460.18, H.460.19 firewall traversal
|
| Video standards |
● H.264, H.265, and H.263 for TANDBERG
™ MXP interoperability only
|
| Video inputs |
● One HDMI input supports formats up to maximum 1080p60
● Two HDMI inputs support formats up to maximum 4K (3840 x 2160) at 30 fps including HD1080p60
● Extended Display Identification Data (EDID)
● Consumer Electronics Control (CEC) 2.0
|
| Video outputs |
● Two HDMI outputs support formats up to 3840 x 2160p60 (4Kp60)
● Consumer Electronics Control (CEC) 2.0
|
| Encode and decode |
● Main video: Full HD 1080p60
● Presentation channel: UHD 4K 2160p5, including 1080p30 and 720p60
|
| Audio standards |
● G.711, G.722, G.722.1, G.729, AAC-LD, and Opus
|
| Audio features |
● High-quality 20 kHz audio
● Subwoofer line out for Quad Camera
● Prepared for inductive loop (line out)
● Automatic Gain Control (AGC)
● Automatic noise reduction
● Active lip synchronization
|
| Audio inputs |
● Three microphones, 4-pin mini-jack
● Embedded audio on two HDMI inputs
● Bluetooth
® - Not available on Non Radio Version
*
|
| Audio outputs |
● 1 line out mini-jack (stereo) (Codec Plus)
● 1 RCA output for subwoofer (Quad Camera)
● Embedded audio on one HDMI output
● HDMI input #1 supports Audio Return Channel (ARC): Audio output to Quad Camera
● Bluetooth
® - Not available on Non Radio Version
*
|
| Speakers
(Quad Camera) |
● High-quality speakers
● Frequency response: 70 Hz to 20 kHz
● Max output level SPL 90dB
|
| Speaker tracking
(Quad Camera, SpeakerTrack 60) |
● 6-element microphone array for accurate speaker tracking
● Quad Camera can support group framing feature with 5x zoom capability
● SpeakerTrack 60 can support close-up feature with 20x zoom capability
|
| PresenterTrack (available when pairing with PTZ 4K Camera, Precision 60 Camera) |
● AI-powered face and upper body detection capability
● Camera automatically follows the active presenter within a defined zone and helps ensure optimized view
|
| Dual stream |
● H.239 (H.323) dual stream
● Binary Floor Control Protocol (BFCP) (SIP) dual stream
● Support resolutions up to 3840 x 2160p5 (4Kp5),1080p30 and 720p60
|
| Wireless sharing |
● Webex App (up to 3840 x 2160p5)
● Cisco Intelligent Proximity client (up to 1920 x 1080p5)
● Miracast (1080p30) – Not available on Non radio version
*
|
| MultiSite features
(embedded multipoint)
(optional upgrade) |
● Adaptive SIP/H.323 MultiSite
◦ 3-way resolution up to 1080p30 + content up to 4Kp5 ◦ 4-way resolution up to 720p30 + content up to 4Kp5
● Full individual audio and video transcoding
● H.323/SIP/VoIP in the same conference
● Support for presentation (H.239/BFCP) from any participant at resolutions up to 3840 x 2160p5
● Best Impression (automatic continuous presence layouts)
● Encryption and dual stream from any site
|
| Protocols |
● H.323
● SIP
● Webex
● ISDN PRI/BRI using the optional ISDN Link
|
| Embedded encryption |
● H.323 and SIP point-to-point
● Standards-based: H.235 v3 and Advanced Encryption Standard (AES)
● Automatic key generation and exchange
|
| IP network features |
● DNS lookup for service configuration
● Differentiated services (Quality of Service [QoS])
● IP-adaptive bandwidth management (including flow control)
● Automatic gatekeeper discovery
● Dynamic playout and lip-sync buffering
● H.245 Dual-Tone Multi-Frequency (DTMF) tones in H.323
● RFC 4733 DTMF tones in SIP
● Date and time support using Network Time Protocol (NTP)
● Uniform Resource Identifier (URI) dialing
● Dynamic Host Configuration Protocol (DHCP)
● 802.1X network authentication
● 802.1Q Virtual LAN
● 802.1p [QoS and Class of Service (CoS)]
● Cisco Media Assure and ClearPath, including packet loss-based downspeeding
|
| Call control |
● Cisco Unified Communications Manager (CUCM)
◦ Native registration CUCM ◦ Requires CUCM Version 10.5.2 or later with device pack Room Kit Plus
● Cisco Expressway
◦ Native registration with Expressway
● Webex
● Third-party H.323 Gatekeepers and standards-based SIP proxies
|
| IPv6 network support |
● Single call stack support for both H.323 and SIP
● Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS, DiffServ
● Support for both static and automatic IP configuration (stateless address auto configuration)
|
| Security features |
● Management using HTTPS and SSH
● IP administration password
● Password to access administration features on Webex Room Navigator controller
● Disable IP services
● Network settings protection
|
| Certificate management |
● Certificate Authority Proxy Function (CAPF) support for additional security
● Manufacturer-Installed Certificates (MIC)
● Locally Significant Certificates (LSC)
● X.509 Digital Certificates (DER encoded binary); both DER and Base-64 formats are acceptable for the client and server certificates; certificates with a key size of 1024, 2048, and 4096 are supported
|
| Other interfaces |
● USB 2.0 port, mini USB port, factory reset pinhole
|
| Network interfaces Codec Plus |
● 1 Ethernet (RJ-45) 10/100/1000 for LAN
● 1 Ethernet (RJ-45) 10/100/1000 for direct pairing with camera (camera control)
● 1 Ethernet (RJ-45) 10/100/1000 with PoE, for direct pairing with Webex Room Navigator
● Wi-Fi 802.11a/b/g/n/ac 2.4 GHz and 5 GHz for LAN- not available in non-radio versions
● 2x2 multiple input and multiple output (MIMO)
Note: Due to compliance regulations, it is required that 802.11d is enabled in the access point for the product to operate properly within 5725 MHz – 5875 MHz. Using a Wifi connection is a flexible option, however an Ethernet connection is always preferred for high performance. |
| Power supplies (2) |
● 100 to 240 VAC, 50/60 Hz, 12V DC input
● Average 20 W, peak 70W
● Quad camera must be used with power supply FSP FSP070-AHAN2 or AcBel ADF019
|
| Operating temperature and humidity |
● 0°C to 35°C (32°F to 95°F) ambient temperature
● 10% to 90% Relative Humidity (RH)
|
| Storage and transport temperature |
● -20°C to 60°C (-4°F to 140°F) at RH 10% to 90% (noncondensing)
|
| Locking mechanism |
● Kensington security lock
|
| Camera overview (Quad Camera) |
● (4) 5K CMOS sensors with machine intelligent switching; providing single HD output at 1080p
● Support up to 60 fps
● 15.1 MP image sensor
● 1/1.7 CMOS
● 5x digital zoom (3 tele-lenses each with 50° horizontal field of view)
● f/2.0 aperture
● 83° horizontal field of view; 51.5° vertical field of view
● Auto-framing (audio + face detect)
● 5120 x 2880 pixel resolution
● Auto focus, brightness, and white balance
● Focus distance 1 m to infinity
|
| Camera overview (SpeakerTrack 60) |
● 1920 x 1080 at 60 frames per second (fps)
● 10x optical zoom, 2x digital zoom, 20x zoom combined
● Pan range: +/-100 degrees, Tilt range: +/-20 degrees, Tracking horizontal FoV: 80 degrees
● Focus distance 1.0m to infinity (wide)
● F-value 1.5
● Manual or automatic to do focus, white balance, and brightness
|
