WS-X6716-10T-3C consists of 16 X2 10 Gigabit Ethernet copper ports module for Cisco Catalyst 6500 series only.* WS-X6716-10T-3C is shipped with WS-X6716-10T and WS-F6700-DFC3C and primarily designed for Supervisor Engine 720 with 3C daughter card to support Cisco 6500 Virtual Switching System (VSS) 1440. WS-X6716-10T-3C supports RJ-45 connectors and provides operational distance of up to 100m, and it also can be used to create a virtual Switch link in VSS up to 4 10GE ports in performance mode.
CISCO WS-X6716-10T-3C 16 PORT COPPER 10 GIGABIT ETHERNET 10G WS-F6700-DFC3C MM
$ 7,240.00
WS-X6708-10G-3C Catalyst 6500 10 Gigabit Ethernet Module
Free US ShippingLife Time WarrantyTechnician Certified
| Product Code | WS-X6716-10T-3C |
| Feature | 16-Port 10GbE Copper Module |
| Ports | 16 |
| Optics | No optics Copper (RJ-45) connectors |
| Switch fabric connection | 40 Gbps (80 Gbps full duplex) |
| Oversubscription | 4:1 |
| Forwarding engine | WS-X6716-10T-3C: equipped with DFC3C for distributed forwarding, supporting 256,000 routes WS-X6716-10T-3CXL: equipped with DFC3CXL for distributed forwarding, supporting 1 million routes |
| Queues | Oversubscription mode: Receive: 1p7q2t per port Transmit: 1p7q4t per port group Performance mode: Receive: 8q4t per port Transmit: 1p7q4t per port |
| Queuing mechanisms | CoS-based queue mapping DSCP-based queue mapping |
| Scheduler | Oversubscription mode: DWRR WRED Performance mode: DWRR WRED SRR at egress |
| Port buffers | Oversubscription mode: 90 MB per port group Performance mode: 200 MB per port |
| Hardware-based multicast replication (Layer 2) | Ingress and egress Approximately 20 GB per replication engine 2 replication engines per module |
| Hardware-based multicast replication (Layer 3) | Ingress and egress Approximately 20 GB per replication engine 2 replication engines per module |
| Jumbo frame support for bridged and routed packets | Up to 9216 bytes |
| Maximum port density per chassis | 130 ports (9-slot chassis) |
| Maximum port density per VSS | 260 ports |
| Can be used to form virtual switch link | Performance mode: Yes (supported in a subsequent software release) Oversubscription mode: No |
| Supervisor engines supported | Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode) |
| Chassis supported | Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, and C6509-NEB-A chassis with dual fan tray (NEBS compliant: operating temperature up to 55°C), or: Non-E-Series chassis with fan tray 2, including Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray (non-NEBS compliant: operating temperature up to 40°C) Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis |
| Slot requirements | Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis |
| Onboard memory | 1 GB default |
