$ 28,995.00

Cisco – CPAK transceiver module – 100 Gigabit Ethernet – 100GBase-CWDM4 – LC single-mode – up to 1.2 miles – 1271 nm / 1291 nm / 1311 nm / 1331 nm – for P/N: A99-8X100GE-TRK – A9K-4X100GE-TRK – A9K-8X100GE-SE-WS – A9K-8X100GE-TRK

Have Questions?
Call 1-844-780-0700
Brand: MPN: A9K‑8X100GE‑SE Condition: REF Availability: ● In Stock
Free US ShippingLife Time WarrantyTechnician Certified

Cisco A9K-8X100GE-SE

The Cisco A9K-8X100GE-SE is a Cisco ASR 9900 Series 8-Port 100 Gigabit Ethernet Line Cards with support for 7- fabric connectors deliver industry-leading high density, with line-rate 100 Gigabit Ethernet ports, to any slot of a Cisco ASR 9900 Series Aggregation Services Router. These high-capacity line cards are designed to remove bandwidth bottlenecks in the network that are caused by a large increase in Video on Demand (VoD), IPTV, point-to-point video, Internet video, and cloud services traffic. A single 100 Gigabit Ethernet port can now replace large 10 Gigabit Ethernet link aggregation bundles to simplify network operations. Based on Cisco CPAK® technology, these line cards have flexible interfaces that support 100 Gigabit Ethernet, 40 Gigabit Ethernet, and 10 Gigabit Ethernet modes, giving customers the flexibility to mix and match interface types on the same line card.

The ASR 9900 Series 8-port 100 Gigabit Ethernet line cards are fully compatible with the Cisco ASR 9904, ASR 9906, ASR 9910, ASR 9912, and ASR 9922 Routers. They are not compatible with the Cisco ASR 9006 and ASR 9010 Routers.

The line cards set a new standard for Layer 2 and Layer 3 service density and scale, allowing operators to offer highly predictable, managed transport services while optimizing the use of network assets. The 10x10G Cisco CPAK breakout option further increases the capability of each line card to support large-scale aggregation, Data Center Interconnect (DCI), and the 10 Gigabit Ethernet Satellite Network Virtualization (nV) System mode on the ASR 9900 Series router. These versatile capabilities help operators qualify and stock one type of line card that can be deployed in any combination of Layer 2, Layer 3, DCI, or aggregation applications, thereby reducing capital expenditures (CapEx) and operating expenses (OpEx), as well as reducing the time required to develop and deploy new services.

The ASR 9900 Series can extend 100 Gigabit Ethernet transport over an IP-over-dense-wave-division-multiplexing (IPoDWDM) network when used with the Cisco ONS 15454 DWDM transponder solution. Distances of up to 3000 kilometers can be achieved while using the optical protection capabilities of the DWDM network.

Customer Support

  • We commit to providing excellence in customer service. We are available 24/7, highly responsive, transparent and offer product, transaction and logistics support.
  • Our philosophy is to be a part of the solution for our clients, so please contact us with any questions or concerns. Check our feedback rating to see what others thought about their experience with us. We look forward to offering you a Five Star member service.

For more information please visit:




Chassis compatibility

Compatible with the Cisco ASR 9006, ASR 9010, ASR 9904, ASR 9906, ASR 9912 and ASR 9922 chassis

Port density

4-ports and 8 ports of 100 Gigabit Ethernet per line card


●100-Gbps IEEE 802.3ba compliant
●100 Gigabit Ethernet PHY monitoring
●IEEE 802.x flow control
●Full-duplex operation
●Per-port byte and packet counters for policy drops; oversubscription drops; Cyclic Redundancy Check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets


●100-Gbps line-rate throughput per port


Each line card is available as either a service edge optimized (enhanced QoS) or packet transport optimized (basic QoS) line card

Reliability and availability

Line card Online Insertion and Removal (OIR) support without system impact

Physical dimensions (H x W x D); weight

8-port 100 Gigabit Ethernet Line Card: 14.5 x 1.63 x 22.02 in.; 28 lb (est.) (368.3 mm x 41.4 mm x 559.3 mm; 12.7 kg)

4-port 100 Gigabit Ethernet Line Card: 14.5 x 1.63 x 22.02 in.; 28 lb (est.) (368.3 mm x 41.4 mm x 559.3 mm; 12.7 kg)

Operating temperature

41 to 104°F (5 to 40°C)

Operating humidity (nominal) (relative humidity)

10 to 85%

Storage temperature

–40 to 158°F (–40 to 70°C)

Storage (relative humidity)

5 to 95%

Note: Not to exceed 0.024 kg of water per kg of dry air

Operating altitude

–60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)

ETSI standards

Cisco ASR 9000 Series Routers are designed to meet:

●EN300 386: Telecommunications Network Equipment (EMC)
●ETSI 300 019 Storage Class 1.1
●ETSI 300 019 Transportation Class 2.3
●ETSI 300 019 Stationary Use Class 3.1
●EN55022: Information Technology Equipment (Emissions)
●EN55024: Information Technology Equipment (Immunity)
●EN50082-1/EN-61000-6-1: Generic Immunity Standard

EMC standards

Cisco ASR 9000 Series Routers are designed to meet:

●FCC Class A
●ICES 003 Class A
●AS/NZS 3548 Class A
●CISPR 22 (EN55022) Class A
●VCCI Class A
●BSMI Class A
●IEC/EN 61000-3-2: Power Line Harmonics
●IEC/EN 61000-3-3: Voltage Fluctuations and Flicker


Cisco ASR 9000 Series Routers are designed to meet:

●IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
●IEC/EN-61000-4-3: Radiated Immunity (10V/m)
●IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
●IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
●IEC/EN-61000-4-5: Signal Ports (1kV)
●IEC/EN-61000-4-5: Surge DC Port (1kV)
●IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
●IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
●IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations


Cisco ASR 9000 Series Routers are designed to meet:

●UL/CSA/IEC/EN 60950-1
●IEC/EN 60825 Laser Safety
●ACA TS001
●AS/NZS 60950
●FDA: Code of Federal Regulations Laser Safety

Enquiry Form