{"title":"Modules","description":"\u003cp\u003eExpand your network’s capabilities with enterprise-grade modules. Browse line cards, supervisor engines, and interface modules designed to boost performance and scalability in switches and routers.\u003c\/p\u003e","products":[{"product_id":"cisco-x4248-fe-sfp-48-port-fe-sfp-ftth-module","title":"Cisco ME-X4248-FE-SFP Catalyst 4500 48-Port 100BASE-X SFP FTTH Fast Ethernet Line Card","description":"\u003cp\u003eThe Cisco ME-X4248-FE-SFP is a 48-port 100BASE-X Fast Ethernet line card for Catalyst 4500-E chassis, with an SFP cage for each port. The card is the same hardware sold as the WS-X4248-FE-SFP, and the ME- prefix marks the Fiber-to-the-Home version, which pairs it with the GLC-FE-100BX-D48 set of 48 100BX-D SFPs. Those SFPs transmit at 1550 nm and receive at 1310 nm over a single strand of single-mode fiber, with spans up to 10 km to a 100BASE-BX10-U device at the far end. Service providers use the card for point-to-point Fast Ethernet to the home or business, and enterprises use it for fiber-to-the-desktop links. All 48 ports run at wire rate, and 100BASE-X SFP optics can be mixed and matched on the same card. It works in the Catalyst 4503-E with up to 96 ports, the 4506-E, 4507R-E and 4507R+E with up to 240, and the 4510R-E and 4510R+E with up to 384. The card follows IEEE 802.3, IEEE 802.3ah and IEEE 802.3x flow control. Its fiber lasers are Class 1 products, and the rated MTBF is 687,828 hours.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833010974893,"sku":"ME-X4248-FE-SFP-REF","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-ME-X4248-FE-SFP-48-Port-FE-SFP-FTTH-Module.png?v=1755890060"},{"product_id":"cisco-ehwic-4esg-4-port-101001000-ethernet-switch-interface-card","title":"Cisco EHWIC-4ESG EtherSwitch 4-Port Gigabit Ethernet Enhanced High-Speed WAN Interface Card","description":"\u003cp\u003eThe Cisco EHWIC-4ESG adds four autosensing 10\/100\/1000 switch ports to an ISR G2 router as an EtherSwitch interface card. A PoE version of this four-port card is the EHWIC-4ESG-P, and the eight-port version is the EHWIC-D-8ESG. Switching runs at Layer 2 on the card, and Layer 3 routing stays on the host router because routed ports are not supported. Each port has eight QoS queues, and the card can learn up to 8000 MAC addresses. The VLAN limit depends on the router, from 16 up to 64, out of 4095 possible VLAN IDs. Layer 2 features cover VTP, IEEE 802.1X, IGMP snooping, Switched Port Analyzer monitoring, storm control and port security. Cards in one router cascade without an external link, up to four on a 2911, 2921, 2951, 3925 or 3945 and one on a 1921. Aggregate throughput from the external ports to the router's Multi Gigabit Fabric is 1 Gbps. Online insertion and removal is not supported, and the card cannot share a chassis with the HWIC-4ESW, HWIC-D-9ESW, NM-16ESW or NM-36ESW switch modules.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833011564717,"sku":"EHWIC-4ESG-REF","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/EHWIC-4ESG-P.jpg?v=1755890082"},{"product_id":"new-cisco-ehwic-4esg-p-4-port-10-100-1000-ethernet-switch-card-w-poe","title":"Cisco EHWIC-4ESG-P EtherSwitch 4-Port Gigabit PoE Enhanced High-Speed WAN Interface Card - New","description":"\u003cp\u003eThe Cisco EHWIC-4ESG-P is a PoE EtherSwitch interface card with four 10\/100\/1000 ports that can power IP telephones in an ISR G2 router. The EHWIC-4ESG is the same four-port card without PoE, and the EHWIC-D-8ESG offers eight ports. The ports comply with IEEE 802.3af at 15.4 W, and ePoE raises the limit to 20 W per port. A port that exceeds 20 W is cut off for overload, and IEEE 802.3at is not supported. The router's PoE power-supply option sets the total budget, because the default supplies have no PoE bus connection and a DC supply cannot provide PoE. Switching happens at Layer 2 with eight QoS queues per port, while the host router handles Layer 3 routing. It learns up to 8000 MAC addresses, and VLAN capacity ranges from 16 to 64 depending on the router. A 1921 takes one card, a 1941 or 2901 takes two, and a 2911 or 2921 takes four. The card does not support online insertion and removal, and it cannot sit in the same chassis as the HWIC-4ESW-POE, HWIC-D-9ESW-POE, NM-16ESW or NM-36ESW.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833011597485,"sku":"EHWIC-4ESG-P-NEW","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/EHWIC-4ESG-P_411e7d41-0aee-4e0c-9f08-20dde06b81df.jpg?v=1755890083"},{"product_id":"cisco-ehwic-d-8esg-8-port-101001000-ethernet-switch-interface-card","title":"Cisco EHWIC-D-8ESG EtherSwitch 8-Port Gigabit Ethernet Enhanced High-Speed WAN Interface Card","description":"\u003cp\u003eThe Cisco EHWIC-D-8ESG is an EtherSwitch interface card that gives an ISR G2 router eight 10\/100\/1000 switch ports. Its PoE counterpart is the EHWIC-D-8ESG-P, while the EHWIC-4ESG is the four-port card in the same Gigabit EtherSwitch family. Layer 2 switching runs on the card itself, while the host router takes care of Layer 3 routing. Every port is an RJ-45 copper connection that carries 1000BASE-T over Category 5 or better UTP cabling. The number of VLANs depends on the router, ranging from 16 on the smaller models to 64 on the largest. Spanning Tree Protocol, Cisco Discovery Protocol, 802.1X authentication, IGMP snooping and storm control are among the supported Layer 2 features. Port security is available too, with no more than 200 secure MAC addresses per router platform. The card family does not support online insertion or removal. A router that already holds an NM-16ESW, NM-36ESW, HWIC-D-9ESW, HWIC-D-9ESW-POE, HWIC-4ESW or HWIC-4ESW-POE module cannot run it at the same time.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833011630253,"sku":"EHWIC-D-8ESG-P-REF","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-EHWIC-D-8ESG-8-Port-Ethernet-Switch-Interface-Card_jpg.png?v=1755890083"},{"product_id":"cisco-ehwic-va-dsl-multi-mode-vdsl2adsl22-ehwic-annex","title":"Cisco EHWIC-VA-DSL-A 1-Port Multimode VDSL2\/ADSL2+ Annex A POTS High-Speed WAN Interface Card","description":"\u003cp\u003eThe Cisco EHWIC-VA-DSL-A is a one-port multimode VDSL2 and ADSL2\/2+ Enhanced High-Speed WAN Interface Card (EHWIC) with Annex A support for use over POTS lines. Unlike the EHWIC-VA-DSL-B, which is the ISDN version, and the EHWIC-VA-DSL-M, which adds Annex M, this model is the Annex A POTS version. It has one RJ-11 VDSL2 interface and is built on the Broadcom 6368 DSL chipset. VDSL2 follows ITU G.993.2 with profiles 8a, 8b, 8c, 8d, 12a, 12b and 17a, with downstream speeds up to 100 Mbps and upstream speeds up to 50 Mbps in Ethernet PTM. ADSL support over POTS covers ITU G.992.1, G.992.3 ADSL2 and G.992.5 ADSL2+. Cisco lists DSLAM interoperability for POTS lines, including the Alcatel ASAM7300 and Ericsson EDA2.1. The card is supported on Cisco 1861E routers and the 1900, 2900 and 3900 Series ISRs, with Cisco IOS Software Release 15.1(3)T or 15.1(4)M and later. Platforms hold one, two or four of these cards depending on the model, with multiple cards supported from IOS Release 15.1(4)M. A straight-through cable is the default, and a crossover cable may be needed when external splitters are used.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833011695789,"sku":"EHWIC-VA-DSL-A-REF","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-EHWIC-VA-DSL-A-Multi-Mode-EHWIC-Annex-A.png?v=1755890086"},{"product_id":"cisco-ehwic-va-dsl-b-multi-mode-vdsl2adsl22-ehwic-annex-b","title":"Cisco EHWIC-VA-DSL-B 1-Port Multimode VDSL2\/ADSL2+ Annex B ISDN High-Speed WAN Interface Card","description":"\u003cp\u003eThe Cisco EHWIC-VA-DSL-B is a one-port multimode VDSL2 and ADSL2\/2+ Enhanced High-Speed WAN Interface Card (EHWIC) with Annex B support for use over ISDN lines. Unlike the EHWIC-VA-DSL-A, which is built for POTS lines, this model is the ISDN version, and the EHWIC-VA-DSL-M adds Annex M over POTS. It has one RJ-11 VDSL2 interface and is built on the Broadcom 6368 DSL chipset. VDSL2 follows ITU G.993.2, and ADSL support covers G.992.1, G.992.3 ADSL2 and G.992.5 ADSL2+, with T1.413 ANSI ADSL DMT issue 2 compliance. Cisco lists DSLAM interoperability for ISDN lines, including the Alcatel ASAM7300 and Siemens HiX 5300. The card is supported on Cisco 1861E routers and the 1900, 2900 and 3900 Series ISRs. Cisco IOS Software Release 15.1(3)T or 15.1(4)M and later is required. Platforms hold one, two or four of these cards depending on the model, with multiple cards supported from IOS Release 15.1(4)M. A straight-through cable is the default, and a crossover cable may be needed when external splitters are used.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833011728557,"sku":"EHWIC-VA-DSL-B-REF","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-EHWIC-VA-DSL-A-Multi-Mode-EHWIC-Annex-A_a11b7d3f-fdc1-47dd-a0a4-7c330c3a4d34.png?v=1755890087"},{"product_id":"cisco-ehwic-va-dsl-m-multi-mode-vdsl2adsl22-ehwic-annex-m","title":"Cisco EHWIC-VA-DSL-M Multimode VDSL2\/ADSL2+ Annex M Enhanced High-Speed WAN Interface Card","description":"\u003cp\u003eThe Cisco EHWIC-VA-DSL-M is a multimode VDSL2 and ADSL2\/2+ Enhanced High-Speed WAN Interface Card (EHWIC) with Annex M support, listed by Cisco for ISR G2 routers. Unlike the EHWIC-VA-DSL-A, which is the Annex A version of the card, this model is the Annex M version. Both versions use the Broadcom 6368 DSL chipset. For VDSL2, the card supports ITU-T G.993.2 with profiles 8a, 8b, 8c, 8d, 12a, 12b and 17a, as well as upstream band 0. For ADSL, it supports ITU-T G.992.3 ADSL2 and G.992.5 ADSL2+. It also supports the G.994.1 handshake procedures for DSL transceivers.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833011761325,"sku":"EHWIC-VA-DSL-M-REF","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-EHWIC-VA-DSL-A-Multi-Mode-EHWIC-Annex-A_9e8954bf-b8d6-4578-b228-f743ad91b1b4.png?v=1755890088"},{"product_id":"cisco-em-hda-3fxs4fxo-7-port-voicefax-expansion-module-3fxs4fxo","title":"Cisco EM-HDA-3FXS\/4FXO High-Density Analog 3-Port FXS 4-Port FXO Voice Fax Expansion Module","description":"\u003cp\u003eThe Cisco EM-HDA-3FXS\/4FXO is a 7-port analog voice and fax expansion module that adds three FXS ports and four FXO ports to a Cisco High-Density Extension Module. The EM-HDA-6FXO adds six FXO ports, the EM3-HDA-8FXS\/DID adds eight FXS or DID ports and the EM-4BRI-NT\/TE adds four BRI ports, while this module mixes three on-premises FXS ports with four off-premises FXO ports. The FXS side serves existing phones, faxes, PBXs and key systems, and the FXO side connects to the central office. It installs on the EVM-HD-8FXS\/DID baseboard, which takes up to two expansion modules in any combination and scales to 24 voice and fax sessions. Loop-start and ground-start signaling are both supported, and address signaling can be in-band DTMF or out-of-band pulse at 10 pps. FXS loop resistance can reach 600 ohms, and ringing is 40 Vrms at 5 REN with 25 Hz and 50 Hz frequencies available. Call disconnect is detected from a progress tone, battery polarity reversal or a power interrupt longer than 600 ms. Signal processing comes from PVDM2 modules that are purchased separately for the baseboard.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833011957933,"sku":"EM-HDA-3FXS\/4FXO-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-EM-HDA-3FXS_4FXO-7-Port-Voice_Fax-Expansion-Module-_E2_80_93-3FXS_4FXO.png?v=1793214115"},{"product_id":"cisco-em-hda-6fxo-6-port-voicefax-expansion-module-fxo","title":"Cisco EM-HDA-6FXO High-Density Analog 6-Port FXO Power Failover Voice Fax Expansion Module","description":"\u003cp\u003eThe Cisco EM-HDA-6FXO gives an EVM-HD-8FXS\/DID baseboard six FXO ports that reach the central office over off-premises analog voice and fax lines. Beside the EM-HDA-3FXS\/4FXO, which divides seven ports between FXS and FXO, this module puts all six of its ports on the FXO side. If the router loses power, FXO power failover can open a direct path between an FXO port and an analog phone, so a line to the PSTN stays available. Any port also supports analog CAMA, short for Centralized Automated Message Accounting. The ports use loop start or ground start signaling, and dialed digits can travel in-band as DTMF or out-of-band as 10 pps pulses. Disconnect supervision responds to a power interrupt over 600 ms, a progress tone below 600 Hz or a battery polarity reversal. The module has no connector of its own, so its ports come out on the baseboard's RJ-21 connector, and up to two expansion modules fit on each baseboard. With one of these modules the baseboard reaches 14 voice sessions, with two it reaches 20, and PVDM2 modules bought separately supply the DSP resources.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012023469,"sku":"EM-HDA-6FXO-REF","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-EM-HDA-3FXS_4FXO-7-Port-Voice_Fax-Expansion-Module-_E2_80_93-3FXS_4FXO_124fc993-676c-4f02-9d40-2e55250e28ef.png?v=1755890095"},{"product_id":"cisco-evm-hd-8fxsdid-high-density-voicefax-extension-module-8-fxsdid","title":"Cisco EVM-HD-8FXS\/DID High-Density Analog 8-Port FXS\/DID Voice Fax Extension Module Baseboard","description":"\u003cp\u003eThe EVM-HD-8FXS\/DID from Cisco is an analog baseboard for voice and fax, and each of its eight ports can be set to FXS or DID. Unlike the EM-HDA-6FXO and EM-HDA-3FXS\/4FXO modules that add ports to it, this board carries the first eight itself and is where those modules plug in. An FXS port connects to a phone or fax machine, supplies ring, voltage and dial tone, and signals with loop start or ground start. A DID port takes a central office trunk with immediate, delay-dial or wink start, over loops up to 1800 ohms. At 5 REN the ringing voltage is 40 Vrms, and the frequency can be set to 25 Hz or 50 Hz. Caller ID is configurable per port on FXS ports and is sent on hook as frequency-shift-keying data, while disconnect supervision uses power denial. Zero, one or two expansion modules can be fitted in any combination, and the baseboard then reaches a ceiling of 24 voice and fax sessions. PVDM2 modules purchased separately provide the DSP resources, and one RJ-21 connector carries every port to a distribution frame or patch panel.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012089005,"sku":"EVM-HD-8FXS\/DID-REF","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-EM-HDA-3FXS_4FXO-7-Port-Voice_Fax-Expansion-Module-_E2_80_93-3FXS_4FXO_64308a0c-8f2c-432c-8201-8fbb33fa4145.png?v=1755890098"},{"product_id":"cisco-hwic-16a-16-port-async-hwic","title":"Cisco HWIC-16A 16-Port Asynchronous EIA-232 Single-Wide High-Speed WAN Interface Card","description":"\u003cp\u003eThe Cisco HWIC-16A is a single-wide WAN interface card that gives a compatible Integrated Services Router sixteen asynchronous EIA-232 ports. Its eight-port counterpart is the HWIC-8A, which has eight asynchronous EIA-232 ports, so this card doubles that count to sixteen. The ports are reached through two high-density 8-port connectors, and the CAB-HD8-ASYNC cable has a high-density connector on one end and eight RJ-45 plugs on the other. The CAB-HD8-KIT cable ends in eight DB-25 modem connectors instead, while the CAB-25AS-MMOD and CAB-25AS-FDTE adapters convert an RJ-45 plug to a DB-25 plug or socket. Each port runs at a maximum asynchronous speed of 230.4 kbps, and the card does not support synchronous operation. Because every port is asynchronous, the card suits console and terminal server connections to EIA-232 devices as well as dial access. The card is a single-wide HWIC with no restrictions on which slot it uses. For service module slots, the SM-32A offers thirty-two asynchronous EIA-232 ports.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012252845,"sku":"HWIC-16A-REF","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/CISCO2951-K9__51718.1364683179.500.750-15.jpg?v=1755890102"},{"product_id":"cisco-hwic-1ce1t1-pri-1port-channelized","title":"Cisco HWIC-1CE1T1-PRI 1-Port Channelized T1\/E1 ISDN PRI High-Speed WAN Interface Card - New","description":"\u003cp\u003eThe Cisco HWIC-1CE1T1-PRI is a single-wide high-speed WAN interface card that gives an Integrated Services Router one channelized T1\/E1 port with ISDN PRI. Its two-port counterpart is the HWIC-2CE1T1-PRI, which supports up to 64 channels per card, while this card supports up to 32. The port is an RJ-48C connector that carries T1 at 1.544 Mbps or E1 at 2.048 Mbps, with an integrated CSU\/DSU. Each port supports up to 24 channels in T1 mode or 31 channels in E1 mode, in either full or fractional n x DS-0 service. T1 framing is Super Frame or Extended Super Frame with AMI or B8ZS line coding, while E1 uses CRC4 framing with HDB3. ISDN PRI for data can serve as a primary WAN link or as WAN backup, and the card also handles Multilink PPP and Multilink Frame Relay. Paired with a PVDM2-12DM, PVDM2-24DM or PVDM2-36DM digital modem module, the card can also provide dial access aggregation. Two LEDs per port show carrier detect with loopback status and alarm conditions.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012285613,"sku":"HWIC-1CE1T1-PRI-NEW","price":995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/HWIC-1CE1T1-PRI_jpg.png?v=1755890103"},{"product_id":"cisco-hwic-1dsu-t1-1-port-t1fractional-t1-dsu","title":"Cisco HWIC-1DSU-T1 1 Port T1\/Fractional T1 DSU - New","description":"\u003cp\u003e1 Port T1\/Fractional T1 DSU\/CSU WAN Interface Card\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012351149,"sku":"HWIC-1DSU-T1-NEW","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/CISCO2951-K9__51718.1364683179.500.750-18.jpg?v=1755890105"},{"product_id":"cisco-hwic-1fe-1-port-10100-routed-port","title":"Cisco HWIC-1FE 1 Port 10\/100 Routed Port - New","description":"\u003cp\u003e1 Port 10\/100 Routed Port HWIC\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012383917,"sku":"HWIC-1FE-NEW","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-HWIC-1FE-1-Port-10.100-Routed-Port.png?v=1755890107"},{"product_id":"cisco-hwic-1ge-sfp-gige-high-speed","title":"Cisco HWIC-1GE-SFP 1xGigE High Speed WAN Interface Card","description":"\u003cp\u003eThe Cisco HWIC-1GE-SFP is a single-port Gigabit Ethernet High-Speed WAN Interface Card that adds a routed 1000 Mbps Ethernet interface to compatible Cisco Integrated Services Routers. The module uses one SFP slot so you can choose copper or optical 1000BASE-T\/SX\/LX\/LH\/ZX and CWDM transceivers to match distance, fiber type, and existing infrastructure. It supports IEEE 802.1Q VLAN tagging, 802.3x flow control, Gigabit EtherChannel for link redundancy, and jumbo frames up to 9576 bytes for efficient LAN, inter-VLAN routing, or Metro Ethernet uplinks. Deploy it as a WAN handoff, MAN connection, or high-speed switch uplink, assigning an IP address directly on the interface without relying on SVI trunking. Built for branch upgrades, it helps increase throughput for voice, video, and cloud traffic while enabling monitoring and policy with NetFlow, ACLs, and QoS features supported by the host router. SFPs are hot-insertable, and performance is platform-limited, ideal for scalable Ethernet WAN access deployments nationwide.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012449453,"sku":"HWIC-1GE-SFP-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/HWIC-1GE-SFP.png?v=1755890107"},{"product_id":"cisco-ws-g5484-1000base-sx-short-wavelength","title":"Cisco WS-G5484 1000BASE-SX Short Wavelength","description":"\u003cp\u003eThis Cisco WS-G5484 compatible GBIC transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a SC connector. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Cisco, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012482221,"sku":"WS-G5484-REF","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/WS-G5484.png?v=1755890108"},{"product_id":"cisco-hwic-4as-4-port-asyncsync-serial-hwic","title":"Cisco HWIC-4A\/S 4 Port Async\/Sync Serial HWIC","description":"\u003cp\u003e4 Port Async\/Sync Serial HWIC\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012547757,"sku":"HWIC-4A\/S-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/CISCO2951-K9__51718.1364683179.500.750-15_d46af86f-bbd1-434f-8dda-4a1a3dd2de5a.jpg?v=1755890110"},{"product_id":"cisco-hwic-4b-st-4-port-isdn-bri-high-speed","title":"Cisco HWIC-4B-S\/T 4 Port ISDN BRI High-Speed - New","description":"\u003cp\u003e4 Port ISDN BRI High-Speed WAN Interface Card\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012580525,"sku":"HWIC-4B-S\/T-NEW","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-HWIC-4B-S_T-4-Port-ISDN-BRI-High-Speed_jpg.png?v=1755890112"},{"product_id":"cisco-ws-x4148-fx-mt-catalyst-4500-fe-switching-module","title":"Cisco WS-X4148-FX-MT Catalyst 4500 48-Port 100BASE-FX MT-RJ Multimode Fast Ethernet Line Card","description":"\u003cp\u003eThe Cisco WS-X4148-FX-MT is a Catalyst 4500 Series classic line card with 48 IEEE 802.3 100BASE-FX Fast Ethernet ports for multimode fiber. Each port uses an MT-RJ connector and reaches up to 2 km, and the card occupies one slot in the chassis. It doubles the port count of the 24-port WS-X4124-FX-MT, the card it is listed as replacing in Cisco's end-of-sale notice. Classic line cards work in the Catalyst 4503, 4506, 4507R and 4510R chassis and in their E-Series versions, with 6 Gbps of bandwidth per slot. They are supported by the Supervisor Engine 8-E2, 7-E3, 7L-E4, 6-E, 6L-E3 and V-10GE. The 100BASE-FX ports run at wire rate, so a fully populated chassis scales from 96 ports in a 4503-E to 384 ports in a 4510R+E. Status and link indicators show green when operational and red when faulty. Because the ports are fiber based, the card connects to Fast Ethernet fiber devices rather than to copper RJ-45 devices. It is designed for point-to-point Fast Ethernet fiber to the home in service provider networks, and for server farms and switch-to-switch links in enterprise networks.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012613293,"sku":"WS-X4148-FX-MT-REF","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Screenshot-2023-11-15-160617.png?v=1755890113"},{"product_id":"cisco-hwic-4esw-poe-4-port-ethernet-switc","title":"Cisco HWIC-4ESW-POE 4 Port WAN Interface Card","description":"\u003cp\u003eCisco HWIC-4ESW-POE 4 Port Ethernet Switc 4 Port Ethernet Switch HWIC with POE\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012646061,"sku":"HWIC-4ESW-POE-REF","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/HWIC-4ESW-POE-4_jpg.png?v=1755890113"},{"product_id":"cisco-hwic-4shdsl-e-4-pair-efm-based-hwic","title":"Cisco HWIC-4SHDSL-E 4 Pair EFM Based HWIC","description":"\u003cp\u003eCisco Integrated Services Routers (ISRs) and Integrated Services Routers Generation 2 (ISR G2) offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012711597,"sku":"HWIC-4SHDSL-E-REF","price":405.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/HWIC-4SHDSL-E_jpg.png?v=1755890115"},{"product_id":"cisco-hwic-8a-8-port-async-hwic","title":"Cisco HWIC-8A 8 Port Async HWIC","description":"\u003cp\u003e8 Port Async HWIC\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012744365,"sku":"HWIC-8A-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/HWIC-8A-8_jpg.png?v=1755890117"},{"product_id":"cisco-hwic-adsl-bst-2-port-hwic-w-1-port","title":"Cisco HWIC-ADSL-B\/ST 2 Port HWIC w\/ 1 port","description":"\u003cp\u003e2 Port HWIC w\/ 1 port ADSLoPOTS and 1-port ISDN BRI-S\/T\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012777133,"sku":"HWIC-ADSL-B\/ST-REF","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/HWIC-ADSL-B.png?v=1755890118"},{"product_id":"cisco-nm-16esw-1-16-port-10100-etherswitc","title":"Cisco NM-16ESW (1) 16 Port 10\/100 EtherSwitc - New","description":"\u003cp\u003e16 Port 10\/100 EtherSwitch NM\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012809901,"sku":"NM-16ESW-NEW","price":283.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/NM-16ESW-1-16-Port-10_100_jpg.png?v=1755890118"},{"product_id":"cisco-nm-1a-oc3-pom-atm-oc3-module","title":"Cisco NM-1A-OC3-POM ATM OC3 Module","description":"\u003cp\u003eATM OC3 Module with Single POM (SFP) slot\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833012842669,"sku":"NM-1A-OC3-POM-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-NM-1A-OC3-POM-ATM-OC3-Module.jpg?v=1755890121"},{"product_id":"cisco-nm-1a-t3-e3-1-port-t3-e3-atm-network-module","title":"Cisco NM-1A-T3\/E3 1-Port T3\/E3 ATM 75-Ohm BNC Router Network Module","description":"\u003cp\u003eThe Cisco NM-1A-T3\/E3 is a single-port ATM network module that connects a router to a DS3 or E3 circuit. Unlike the clear-channel NM-1T3\/E3, this module carries ATM traffic, and unlike the NM-1A-T3 and NM-1A-E3 it supports both DS3 and E3 on one part. The line rate is 44.736 Mbps for DS3 and 34.368 Mbps for E3. Connections use standard 75-ohm BNC connectors on coaxial cable. Cable reach is 450 feet for DS3 and 1250 feet for E3. As many as 1024 virtual connections can be active at once, using virtual path identifiers from 0 to 255 and virtual channel identifiers from 0 to 65535. Both permanent virtual circuits and switched virtual circuits are supported. Cell delineation is handled with PLCP and HEC, and the module supports F4 and F5 OAM cells along with AAL5 framing. Because it is an ATM interface, data crosses the link as cells rather than as a clear-channel stream.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013203117,"sku":"NM-1A-T3\/E3-REF","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/NM-1A-T3_E3-scaled-1.png?v=1755890123"},{"product_id":"cisco-nm-1t3e3-1-port-t3e3-network-module","title":"Cisco NM-1T3\/E3 1 Port T3\/E3 Network Module","description":"\u003cp\u003eThe Cisco T3\/E3 Network Module provides high-speed WAN access for the Cisco 2600, 3600, and 3700 series routers. T3\/E3 WAN access enables the network to carry high volumes of data and rich multimedia content, while providing low latency for voice over IP (VoIP).\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013268653,"sku":"NM-1T3\/E3-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/NM-1T3-E3__62016.1364683209.500.750-1.jpg?v=1755890123"},{"product_id":"cisco-nm-8ce1t1-pri-8-port-channelized","title":"Cisco NM-8CE1T1-PRI 8 Port Channelized - New","description":"\u003cp\u003em8 Port Channelized T1\/E1 and PRI Network Module\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013301421,"sku":"NM-8CE1T1-PRI-NEW","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/NM-8CE1T1-PRI-8-Port-Channelized_jpg.png?v=1755890123"},{"product_id":"cisco-nm-hd-1v-one-slot-ip-communications-voice","title":"Cisco NM-HD-1V One-Slot IP Communications Voice","description":"\u003cp\u003eOne-Slot IP Communications Voice\/Fax Network Module\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013334189,"sku":"NM-HD-1V-REF","price":428.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/NM-HD-1V__98937.1364683210.500.750.jpg?v=1755890125"},{"product_id":"cisco-nm-hd-2ve-two-slot-ip-comm-enhanced","title":"Cisco NM-HD-2VE Two-Slot IP Comm Enhanced","description":"\u003cp\u003eCisco NM-HD-2VE Two-Slot IP Comm Enhanced Two-Slot IP Communications Enhanced Voice\/Fax Network Module\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013399725,"sku":"NM-HD-2VE-REF","price":280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/NM-HD-1V__98937.1364683210.500.750_0d5b40c5-c751-4c6d-ae69-44bd3f35ab00.jpg?v=1755890127"},{"product_id":"cisco-pvdm2-16-16-channel-packet-voice","title":"Cisco PVDM2-16 16-Channel High-Density ISR 2800\/3800 Packet Fax and Voice DSP Module","description":"\u003cp\u003eThe Cisco PVDM2-16 is a high-density packet fax and voice DSP module that brings 16 channels of voice and fax processing to a supported Cisco Integrated Services Router. Within the PVDM2 family it sits between the 8-channel PVDM2-8 and the 32-channel PVDM2-32, with the PVDM2-48 and PVDM2-64 above them. How many channels run at once depends on the codec, with 16 for G.711, 8 at medium complexity and 6 at high complexity. G.723.1, G.728, G.729, G.729b and iLBC are the high-complexity codecs, and modem relay is handled at the same level. G.729a, G.729ab, G.726 and G.722 run at medium complexity, along with fax relay. Software echo cancellation covers a 64 ms tail and complies with ITU-T G.168, while a Texas Instruments TNETV2510GGW DSP clocked at 200 MHz handles the processing with 128 megabits of synchronous DRAM. The module connects through an 80-pin SIMM interface and is field-upgradable, so voice capacity can grow with the deployment. It works with the Cisco 2811, 2821, 2851, 3825 and 3845 routers and with NM-HDV2 voice network modules. On the 2911, 2921, 2951, 3925 and 3945 routers, module support comes through the PVDM2-ADPTR adapter.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013530797,"sku":"PVDM2-16-REF","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/PVDM3-1-scaled-1.png?v=1755890131"},{"product_id":"cisco-ws-x4448-gb-sfp-catalyst-4500-48-port-1000base-x","title":"Cisco WS-X4448-GB-SFP Catalyst 4500 48-Port Classic Gigabit Ethernet SFP Fiber Line Card","description":"\u003cp\u003eThe Cisco WS-X4448-GB-SFP is a Catalyst 4500 classic Gigabit Ethernet fiber line card with 48 ports that accept 1000BASE-X SFP optics. The WS-X4748-SFP-E is the E-Series card with 48 SFP ports that is nonblocking at 48 gigabits per slot, while this card is 8-to-1 oversubscribed. Classic line cards provide 6 Gbps of switching capacity per slot, which gives this card its 8-to-1 ratio across 48 ports. Any mix of 1000BASE-X SFP optics can sit on the same card, so multimode and single-mode fiber links can share one line card by changing the SFP type. The WS-X4448-GB-LX has the same 48-port layout with 1000BASE-LX ports. Both classic and E-Series Catalyst 4500 chassis can host this line card, because classic line cards may be deployed in either. Packet processing, queuing, buffering and QoS all occur in the supervisor engine rather than on the line card. Each card adds 48 Gigabit fiber ports to the chassis, and several cards can share one chassis.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013825709,"sku":"WS-X4448-GB-SFP-REF","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/WS-X4448-GB-SFP.png?v=1755890138"},{"product_id":"cisco-ws-x45-sup6-e-catalyst-4500-e-series-sup-6-e-2x10gex2-2-ge","title":"Cisco WS-X45-SUP6-E Catalyst 4500 E-Series Sup 6-E","description":"\u003cp\u003emThe Cisco Catalyst 4500 Supervisor Engine 6-E with CenterFlex technology is an intelligent, high-performance, next-generation extension to the Cisco Catalyst 4500 Series optimized for customers deploying business-critical applications. CenterFlex technology is enabled by Cisco developed application-specific integrated circuits (ASICs) specific to the Supervisor Engine 6-E that deliver industry-leading centralized performance and configuration flexibility. CenterFlex technology helps enable granular optimization of real-time voice, video, and data communications to ensure workforce productivity and profitability and customer success for organizations of all sizes.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013924013,"sku":"WS-X45-SUP6-E-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/WS-X45-SUP6-E-scaled.jpg?v=1755890140"},{"product_id":"cisco-ws-x45-sup6-e2-catalyst-45xxr-e-series-sup-6-e2x10gex2-2-ge","title":"Cisco WS-X45-SUP6-E\/2 Catalyst 45xxR E-Series Sup 6-E","description":"\u003cp\u003eThe Cisco Catalyst 4500 Supervisor Engine 6-E with CenterFlex technology is an intelligent, high-performance, next-generation extension to the Cisco Catalyst 4500 Series optimized for customers deploying business-critical applications. CenterFlex technology is enabled by Cisco developed application-specific integrated circuits (ASICs) specific to the Supervisor Engine 6-E that deliver industry-leading centralized performance and configuration flexibility. CenterFlex technology helps enable granular optimization of real-time voice, video, and data communications to ensure workforce productivity and profitability and customer success for organizations of all sizes.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013956781,"sku":"WS-X45-SUP6-E\/2-REF","price":12480.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/WS-X45-SUP6-E-1-scaled.jpg?v=1755890143"},{"product_id":"cisco-ws-x45-sup7-e-catalyst-4500-e-series-supervisor-848gbps","title":"Cisco WS-X45-SUP7-E Catalyst 4500 E-Series Supervisor, 848Gbps","description":"\u003cp\u003eEstablishing borderless leadership is now easier than ever to achieve with the Cisco Supervisor Engine 7-E, an enterprise-class borderless network access and aggregation supervisor engine. Cisco Supervisor Engine 7-E is built with price-performance aggregation deployments in mind, providing increased Gigabit Ethernet and 10 Gigabit Ethernet fiber density along with hardware capabilities to support enterprise-class aggregation functionalities. Supervisor Engine 7-E facilitates borderless user experiences for enterprise, public sector, mid-market, and commercial customer deployment business-critical applications.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833013989549,"sku":"WS-X45-SUP7-E-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/CISCO_WS-X45-SUP7-E.png?v=1755890142"},{"product_id":"cisco-ws-x45-sup7-e2-catalyst-4500-e-series-supervisor-848gbps","title":"Cisco WS-X45-SUP7-E\/2 Catalyst 4500 E-Series Supervisor, 848Gbps","description":"\u003cp\u003eEstablishing borderless leadership is now easier than ever to achieve with the Cisco Supervisor Engine 7-E, an enterprise-class borderless network access and aggregation supervisor engine. Cisco Supervisor Engine 7-E is built with price-performance aggregation deployments in mind, providing increased Gigabit Ethernet and 10 Gigabit Ethernet fiber density along with hardware capabilities to support enterprise-class aggregation functionalities. Supervisor Engine 7-E facilitates borderless user experiences for enterprise, public sector, mid-market, and commercial customer deployment business-critical applications.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833014055085,"sku":"WS-X45-SUP7-E\/2-REF","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/CISCO_WS-X45-SUP7-E_b789dda1-2d8c-4fea-92e4-466258370132.png?v=1755890145"},{"product_id":"cisco-ws-x4516-10ge-catalyst-4500-supervisor","title":"Cisco WS-X4516-10GE Catalyst 4500 Supervisor","description":"\u003cp\u003eThe Cisco Catalyst 4500 Series Supervisor Engine V-10GE continues the nonblocking, robust Layer 2-4 switching found in previous Cisco Catalyst 4500 Series supervisor engines with the addition of wire-speed 10-Gigabit Ethernet uplinks, 136-Gbps capacity and 102-mpps throughput, and additional features to further enhance resilient control of converged data, voice, and video networks with high availability to help enable business resiliency for enterprise and metropolitan (metro) Ethernet customers. Network control extends from the backbone to the edge with intelligent services such as granular quality of service (QoS), Internet security, and network management.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833014087853,"sku":"WS-X4516-10GE-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-WS-X4516-10GE-Catalyst-4500-Supervisor.jpg?v=1755890147"},{"product_id":"cisco-ws-x4606-x2-e-catalyst-4500-e-series-6-port","title":"Cisco WS-X4606-X2-E Catalyst 4500 E-Series 6-Port","description":"\u003cp\u003eThe Cisco Catalyst 4500 6-port E-Series 10 Gigabit Ethernet line card (2.5:1 oversubscribed) can be deployed for high-performance 10 Gigabit Ethernet aggregation in the campus, in small to medium networks as a core switch, or for high-performance wiring closets where additional 10 Gigabit Ethernet uplinks are required. The Cisco Catalyst 4500 E-Series 6-port 10 Gigabit Ethernet line card supports standard X2 optics as well as the Cisco TwinGig modules.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833014186157,"sku":"WS-X4606-X2-E-REF","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-WS-X4606-X2-E-Catalyst-4500-E-Series-6-Port.jpg?v=1755890150"},{"product_id":"cisco-ws-x4624-sfp-e-catalyst-4500-e-series-24-port","title":"Cisco WS-X4624-SFP-E Catalyst 4500 E-Series 24-Port","description":"\u003cp\u003eThe Cisco Catalyst 4500 E-Series is a high-performance next-generation extension to the Cisco Catalyst 4500 series. The \"E-Series\" is composed of the Cisco Catalyst 4500 series supervisor engine 6-E with CenterFlex technology, E-Series line cards, and E-Series chassis that are designed for secure, flexible, nonstop communications with superior backward and forward compatibility delivering exceptional investment protection for organizations of all sizes.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833014218925,"sku":"WS-X4624-SFP-E-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/Cisco-WS-X4624-SFP-E-Catalyst-4500-E-Series-24-Port.jpg?v=1755890151"},{"product_id":"cisco-x2-10gb-cx4-10gbase-cx4-x2-module","title":"Cisco X2-10GB-CX4 10GBASE-CX4 X2 Module","description":"\u003cp\u003e10GBASE-CX4 X2 Module\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833014284461,"sku":"X2-10GB-CX4-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/CISCO_X2-10GB-SR.png?v=1755890153"},{"product_id":"cisco-c2960x-stack-flexstack-stacking-module","title":"Cisco C2960X-STACK Catalyst 2960-X FlexStack-Plus 80Gbps Hot-Swappable Stacking Module","description":"\u003cp\u003eThe Cisco C2960X-STACK is the FlexStack-Plus stacking module made for Catalyst 2960-X switches, a hot-swappable card that sits in the slot on the rear panel of the switch. The C2960S-STACK is the FlexStack module for Catalyst 2960-S switches, which reaches 20 Gbps across up to four switches, while this module reaches 80 Gbps across up to eight. Two stack ports, labeled STACK 1 and STACK 2, accept the FlexStack cables that link the switches into one stack. The CAB-STK-E-0.5M, CAB-STK-E-1M and CAB-STK-E-3M cables, at 0.5 m, 1 m and 3 m, are the FlexStack cable lengths for FlexStack-Plus stacking. Because the module is hot-swappable, the switch can stay powered on while the module is inserted. Each port LED glows green when a cable is attached and the port is active, and it stays off when no cable is attached. The module is backward compatible with FlexStack, the stacking technology that Catalyst 2960-S switches use. It works in Catalyst 2960-X switches that have a FlexStack-Plus slot, and not every switch in the line has one.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833014612141,"sku":"C2960X-STACK-REF","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/C2960X-STACK-scaled-1.jpg?v=1793654548"},{"product_id":"new-asr1000-esp10-n-cisco-asr-1000-processor-asr1000-esp10-n","title":"Cisco ASR1000-ESP10-N ASR 1000 Series 10Gbps Nonencryption Embedded Services Processor - New","description":"\u003cp\u003eThe Cisco ASR1000-ESP10-N is the nonencryption version of the ASR 1000 Series ASR1000-ESP10 Embedded Services Processor. Unlike the standard ESP10, it can only run noncrypto Cisco IOS XE software images. It does not support IPsec or other encryption services. Compared to the lower-tier ASR1000-ESP5 sibling, which forwards at 5 Gbps and 4 Mpps, the ESP10-N doubles both figures to 10 Gbps and 8 Mpps across common features. Those features include IPv4 forwarding, IP multicast, ACLs, QoS, RPF, load balancing, and NetFlow. Onboard resources include a 512MB Cisco QuantumFlow Processor, 2GB of FECP DRAM, a 10Mb TCAM, and 128MB of packet buffer memory. The module installs in Cisco ASR 1002, ASR 1004, or ASR 1006 chassis and supports 1+1 high availability redundancy for continuous forwarding during a module failure. Front-panel PWR, STAT, ACTV, and STBY LEDs indicate power status, boot state, and active or standby role.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833018249389,"sku":"ASR1000-ESP10-N-NEW","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/asr1000-esp10_-n_1.jpg?v=1755890255"},{"product_id":"new-asr1000-sip10-cisco-asr-1000-processor-asr1000-sip10","title":"Cisco ASR1000-SIP10 ASR 1000 10Gbps 4-Bay Half-Height SPA Interface Processor Carrier Card - New","description":"\u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:--spacing(4)] @w-sm\/main:[--thread-content-margin:--spacing(6)] @w-lg\/main:[--thread-content-margin:--spacing(16)] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\" tabindex=\"-1\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col grow\"\u003e\n\u003cdiv class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal [.text-message+\u0026amp;]:mt-1\" dir=\"auto\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[1px]\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full break-words dark markdown-new-styling\"\u003e\n\u003cp\u003eThe Cisco ASR1000-SIP10 is a SPA Interface Processor for the ASR 1000 Series that carries shared port adapters and provides no network connectivity on its own. Unlike the SIP40, which provides up to 40 Gbps of aggregate bandwidth and up to 24 ports per half-height SPA, the SIP10 provides up to 10 Gbps of oversubscription and up to 16 ports per half-height SPA. It accepts four half-height SPAs or two full-height SPAs, with up to 32 ports per full-height SPA. A combination of two half-height SPAs and one full-height SPA is also supported, up to 64 ports in total. The SPAs can run at quarter rate, full rate or a combination of both. The SPA families it carries cover copper, channelized, POS, ATM and Ethernet interfaces. The SIP fits ASR 1004 and ASR 1006 routers. Both the SIP and its SPAs support online insertion and removal, and SPAs can be inserted or removed independently of the SIP. Unused subslots should be filled with SPA-BLANK= filler plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833018282157,"sku":"ASR1000-SIP10-NEW","price":1320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/asr1000-sip10.jpg?v=1755890256"},{"product_id":"cisco-asr1000-esp10-asr-1000-series-10-gbps-esp-embedded-services-processor-refurbished","title":"Cisco ASR1000-ESP10 ASR 1000 Series 10 Gbps ESP Embedded Services Processor Refurbished","description":"\u003cp\u003eThe Cisco ASR1000-ESP10 is an Embedded Services Processor designed to deliver reliable 10 Gbps system throughput for Cisco ASR 1000 Series Aggregation Services Routers. Acting as the performance engine of the platform, it enables high-speed packet forwarding while supporting advanced service features such as QoS, NAT, firewall, and VPN capabilities depending on Cisco IOS XE software and licensing. The ASR1000-ESP10 is ideal for enterprise WAN edge, managed services, and service provider deployments that require consistent routing performance with integrated security and traffic optimization. Its modular design supports efficient upgrades and maintenance in supported ASR 1000 chassis, helping reduce downtime and extend platform life. Whether you are expanding WAN capacity, upgrading routing performance, or enabling advanced services at the edge, the Cisco ASR1000-ESP10 provides a cost-effective way to scale throughput while maintaining the proven resiliency and compatibility of the ASR 1000 architecture.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833018609837,"sku":"ASR1000-ESP10-REF","price":177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/asr1000-esp10_-n_1_d9eb4a73-1952-48bd-a474-148360da035f.jpg?v=1755890264"},{"product_id":"cisco-asr1000-rp2-asr-1000-series-asr1000-series-route-processor-2","title":"Cisco ASR1000-RP2 ASR 1000 Series 16GB Modular Redundant Carrier-Grade Route Processor","description":"\u003cp\u003eThe Cisco ASR1000-RP2 is a Route Processor 2 module for ASR 1000 Series chassis, supplying the control-plane, management, and high-availability functions required for carrier-grade edge services. It supports ASR1004, ASR1006, ASR1006-X, ASR1009-X, and ASR1013 platforms and provides a dual-core 2.66 GHz processor with 8 GB DRAM standard, upgradeable to 16 GB for larger routing tables and services scale. Embedded 2 GB bootflash stores system images, while a front-mounted 80 GB hard drive provides space for software packages, configurations, logs, and operational data. Two USB ports support external storage and offline image handling, and a dedicated 10\/100\/1000 management Ethernet port enables out-of-band administration. Field-replaceable, hot-swappable design minimizes downtime during maintenance. Includes Stratum-3 clock circuitry with BITS output support for timing distribution in service-provider and critical enterprise networks. Supports processor redundancy, stateful switchover, nonstop forwarding, and in-service software upgrade capabilities when deployed in redundant configurations. Ideal for upgrading capacity without replacing chassis.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833018904749,"sku":"ASR1000-RP2-REF","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/ASR1000-RP2.jpg?v=1755890274"},{"product_id":"cisco-asr1000-esp10-asr-1000-series-10-gbps-esp-embedded-services-processor-new","title":"Cisco ASR1000-ESP10 ASR 1000 Series 10 Gbps ESP Embedded Services Processor - New","description":"\u003cp\u003eCisco ASR1000-ESP10 is an Embedded Services Processor designed to deliver reliable 10 Gbps system throughput for Cisco ASR 1000 Series Aggregation Services Routers. Acting as the performance engine of the platform, it enables high-speed packet forwarding while supporting advanced service features such as QoS, NAT, firewall, and VPN capabilities depending on Cisco IOS XE software and licensing. The ASR1000-ESP10 is ideal for enterprise WAN edge, managed services, and service provider deployments that require consistent routing performance with integrated security and traffic optimization. Its modular design supports efficient upgrades and maintenance in supported ASR 1000 chassis, helping reduce downtime and extend platform life. Whether you are expanding WAN capacity, upgrading routing performance, or enabling advanced services at the edge, the Cisco ASR1000-ESP10 provides a cost-effective way to scale throughput while maintaining the proven resiliency and compatibility of the ASR 1000 architecture.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833018937517,"sku":"ASR1000-ESP10-NEW","price":795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/asr1000-esp10_-n_1-1.jpg?v=1755890275"},{"product_id":"cisco-a9k-mod160-se-asr-9000-mod160-modular-card","title":"Cisco A9K-MOD160-SE ASR 9000 Mod160 160 Gbps Service Edge Modular Line Card 2x MPA Bays - New","description":"\u003cp\u003eThe Cisco A9K-MOD160-SE is a 160 Gbps modular line card for the Cisco ASR 9000 Series Aggregation Services Routers, optimized for service edge deployments requiring enhanced quality of service. It features 2 modular port adapter slots that support mix-and-match configurations of Ethernet interfaces including SFP, XFP, and QSFP optics, allowing customers to customize each slot to their specific port demands. Compatible with the ASR 9001, ASR 9006, and ASR 9010 chassis, the line card runs Cisco IOS XR and provides simultaneous Layer 2 and Layer 3 services including MPLS, EVPN, IPoDWDM, and L3VPN with hardware-based hierarchical QoS for traffic prioritization. The modular design supports a wide range of port adapters such as 4-port 10GE, 20-port 1GE, and 2-port 40GE configurations in any combination within a single slot. Carrier-class features include integrated Synchronous Ethernet, IEEE 1588v2 timing support, real-time media monitoring for video and voice flows, NetFlow, and OAM capabilities including IEEE 802.1ag, IEEE 802.3ah, and ITU Y.1731. The line card supports online insertion and removal without system impact and a green design that places unused resources in power-saving mode. Ideal for service provider edge and aggregation deployments supporting VoD, IPTV, internet video, mobile backhaul, and cloud services traffic.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833019101357,"sku":"A9K-MOD160-SE-NEW","price":3395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/A9K-MOD80-scaled-1.jpg?v=1755890277"},{"product_id":"cisco-rsp720-3cxl-ge-cisco-7600-route-switch-processor","title":"Cisco RSP720-3CXL-GE 7600 2-Port Gigabit Ethernet Uplink PFC3CXL 720Gbps Route Switch Processor","description":"\u003cp\u003eThe Cisco RSP720-3CXL-GE is a Route Switch Processor 720 for Cisco 7600 routers, pairing the high-capacity PFC3CXL policy feature card with an MSFC4. The RSP720-3C-GE uses the PFC3C and defaults to 1 GB of route processor DRAM, whereas this card carries the PFC3CXL and defaults to 2 GB. Two Gigabit Ethernet uplinks are provided, with port 1 taking a 1-Gbps SFP module and port 2 taking either a 1-Gbps SFP module or a 10\/100\/1000-Mbps RJ-45 connection. The RSP720-3CXL-10GE instead provides two 10 Gigabit Ethernet X2 uplinks. An integrated 720-Gbps switch fabric is built in, and QoS ports follow a 1p1q4t receive and 1p2q2t transmit layout. Memory is 512 MB of bootflash, 4 MB of NVRAM, 4 MB of ROMMON, 1 to 4 GB of route processor DRAM and 1 to 2 GB of switch processor DRAM. The switch processor has one miniDIMM socket for a 2 GB DIMM and the route processor has two, while two front-panel CompactFlash Type II slots provide storage. The card is not supported in the Cisco 7603 or OSR-7609 chassis, and it does not support Optical Service Modules or the FlexWAN module.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833019166893,"sku":"RSP720-3CXL-GE-REF","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/RSP720-3CXL-GE-scaled-1.jpg?v=1755890280"},{"product_id":"cisco-a9k-24x10ge-se-24-port-10-gigabit-service-engine-line-card-asr-9000-series","title":"Cisco A9K-24X10GE-SE ASR 9000 24-Port 10-Gigabit Ethernet SFP+ Service Edge Optimized Line Card","description":"\u003cp\u003e\u003cspan data-sheets-root=\"1\"\u003eThe Cisco A9K-24X10GE-SE is a 24-port 10 Gigabit Ethernet line card for the ASR 9000 Series, designed for high-capacity Carrier Ethernet and IP\/MPLS edge deployments. All 24 ports operate at 10 Gbps line rate using SFP+ optics, not included, supporting a full range of interface types including SR, LR, ER, ZR, and ITU-T DWDM modules for short and long-haul applications. The Service Edge Optimized (-SE) designation indicates enhanced hierarchical QoS, making this card the appropriate choice over the Packet Transport (-TR) variant when granular traffic management across multiple service tiers is required; both variants can be mixed in the same chassis. The card provides simultaneous Layer 2 and Layer 3 service support including IP, MPLS, L2VPN, and L3VPN, enabling a single line card to be deployed across any combination of access, aggregation, or edge roles. Carrier-class OAM capabilities include NetFlow, 802.1ag, 802.3ah, Y.1731, IP SLA, VCCV, BFD, and VidMon for real-time video flow monitoring. Synchronous Ethernet (SyncE) and IEEE 1588v2 PTP provide precision timing for mobile backhaul and TDM migration use cases. G.709 OAM and Advanced FEC are available via optional per-card license. Hot-swappable OIR is supported without system impact. Compatible with all ASR 9000 6-slot, 10-slot, and 22-slot chassis. Managed via Cisco IOS XR.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833019232429,"sku":"A9K-24X10GE-SE-REF","price":635.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/A9K-24X10GE-SE-scaled-1.jpg?v=1755890281"},{"product_id":"cisco-a9k-2x100ge-tr-asr-9000-series-2-port-100ge-packet-optimized-line-card","title":"Cisco A9K-2X100GE-TR ASR 9000 2-Port 100GE Packet Transport Optimized Line Card","description":"\u003cp\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"2\"\u003eThe\u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"32\"\u003e Cisco \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"39\"\u003eA9K-2X100GE-TR is a 2-port 100 \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"70\"\u003eGigabit Ethernet Packet \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"94\"\u003eTransport Optimized line \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"119\"\u003ecard for the Cisco ASR \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"142\"\u003e9000 Series \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"154\"\u003eAggregation Services Router, \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"183\"\u003edelivering 200 Gbps \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"203\"\u003efull-duplex, non-blocking \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"229\"\u003ethroughput for metro, edge, \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"257\"\u003eaggregation, and core routing \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"287\"\u003eenvironments. Requires CFP \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"314\"\u003eoptics, supporting both \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"338\"\u003emetro and long-haul \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"358\"\u003eoptical modules for \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"378\"\u003eflexible deployment \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"398\"\u003eacross varying \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"413\"\u003edistance requirements. \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"436\"\u003eLarge 10 Gigabit \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"453\"\u003eEthernet link aggregation \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"479\"\u003ebundles can be \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"494\"\u003econsolidated into a single 100 \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"525\"\u003eGigabit Ethernet port to \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"550\"\u003esimplify network designs. \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"576\"\u003eThe line card supports advanced Layer 2 \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"616\"\u003eand Layer 3 services including MPLS, \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"653\"\u003eCarrier Ethernet, multicast, and \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"686\"\u003eQuality of Service for scalable, highly \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"726\"\u003eavailable IP\/MPLS edge services. \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"759\"\u003eRedundant control and data plane \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"792\"\u003earchitecture along with In-Service \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"827\"\u003eSoftware Upgrades support carrier-grade \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"867\"\u003eresiliency. Hot-swappable for \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"897\"\u003emaintenance with minimal disruption. \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"934\"\u003eCompatible with ASR 9006, ASR 9010, ASR \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"974\"\u003e9904, ASR 9912, and ASR 9922 chassis. \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"1012\"\u003eRuns Cisco IOS XR. For enhanced Service \u003c\/span\u003e\u003cspan class=\"_animating_6ta1u_10\" data-newtext-seq=\"1052\"\u003eEdge QoS see A9K-2X100GE-SE.\u003c\/span\u003e\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":44833019297965,"sku":"A9K-2X100GE-TR-REF","price":1450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/files\/A9K-2X100GE-TR-scaled-1.jpg?v=1755890283"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0640\/7667\/7293\/collections\/Screenshot_2025-09-15_at_4.09.31_PM.png?v=1757970621","url":"https:\/\/netmode.com\/collections\/modules.oembed?page=24","provider":"Netmode","version":"1.0","type":"link"}